vmailmgr CGI Documentation
14 September 2000
Bruce Guenter
_________________________________________________________________
Table of Contents
* 1. Introduction
+ 1.1 Common Form Configuration
o 1.1.1 Required Form Fields
o 1.1.2 Optional Form Fields
* 2. listvdomain
+ 2.1 Overview
+ 2.2 Form Configuration
o 2.2.1 Required Form Fields
o 2.2.2 Optional Form Fields
* 3. vaddalias
+ 3.1 Overview
+ 3.2 Form Configuration
o 3.2.1 Required Form Fields
o 3.2.2 Optional Form Fields
* 4. vadduser
+ 4.1 Overview
+ 4.2 Form Configuration
o 4.2.1 Required Form Fields
o 4.2.2 Optional Form Fields
* 5. vchattr
+ 5.1 Overview
+ 5.2 Form Configuration
o 5.2.1 Required Form Fields
* 6. vchforwards
+ 6.1 Overview
+ 6.2 Form Configuration
o 6.2.1 Required Form Fields
o 6.2.2 Optional Form Fields
* 7. vdeluser
+ 7.1 Overview
+ 7.2 Form Configuration
o 7.2.1 Required Form Fields
* 8. vpasswd
+ 8.1 Overview
+ 8.2 Form Configuration
o 8.2.1 Required Form Fields
_________________________________________________________________
1. Introduction
This is the documentation for the CGI programs for vmailmgr.
1.1 Common Form Configuration
The following form fields are common to all of the vmailmgr CGI
programs.
1.1.1 Required Form Fields
Field:
vdomain
Description:
This field specifies the name of the virtual domain under which
to perform this operation.
Syntax:
`<input type=hidden name=vdomain value="domain-name">' or
`<input type=text name=vdomain>'
Field:
password
Description:
Unless noted below, this field specifies the password of the
administrator for the given virtual domain.
Syntax:
`<input type=password name=password>'
1.1.2 Optional Form Fields
Field:
error_redirect
Description:
If this field is set, any operation that results in an error
will be redirected to the given URL. If not set, a
pre-programmed document (which includes the error message) will
be output.
Syntax:
`<input type=hidden name=error_redirect value="URL">'
Field:
redirect
Description:
If this field is set, any operation that completes successfully
with be redirected to the given URL. If not set, a
pre-programmed document (which includes the completion message)
will be output.
Syntax:
`<input type=hidden name=redirect value="URL">'
2. listvdomain
2.1 Overview
This CGI program will list the mailboxes and aliases in a virtual
domain in a three-column table. The first column lists the mailbox or
alias name, the second column is either `Alias' or `Mailbox', and the
third column lists the destination.
2.2 Form Configuration
2.2.1 Required Form Fields
No additional form fields are Required.
2.2.2 Optional Form Fields
Field:
body-flags
Description:
If present, the contents of this field is inserted into the
`<body>' tag at the start of the document.
Syntax:
`<input type=hidden name=body-flags value="bgcolor=ffffff">'
Field:
cell-align
Description:
Sets the cell alignment. Defaults to `left'.
Syntax:
`<input type=hidden name=cell-align value=center>'
Field:
cell-post
Description:
If present, the contents of this field will be output prior to
every `</td>' tag.
Syntax:
`<input type=hidden name=cell-post value="</font>">'
Field:
cell-pre
Description:
If present, the contents of this field will be output after
every `<td>' tag.
Syntax:
`<input type=hidden name=cell-pre value="<font size=1
name=ariel>">'
Field:
p-align
Description:
Sets the default paragraph alignment. Defaults to `left'.
Syntax:
`<input type=hidden name=p-align value=center>'
Field:
title-post
Description:
If present, the contents of this field are output after the
title text. Defaults to `</h1>'.
Syntax:
`<input type=hidden name=title-post value="</font>">'
Field:
table-align
Description:
Sets the allignment of the table listing the users. Defaults to
`left'.
Syntax:
`<input type=hidden name=table-align value=center>'
Field:
title-pre
Description:
If present, the contents of this field are output before the
title text. Defaults to `<h1>'.
Syntax:
`<input type=hidden name=title-pre value="<font size=3
face=verdana>">'
Field:
userlink
Description:
If this field is present, all user names will be enclosed in a
link to the contents of this field. If the field contains a
'%', it will be replaced by the user name.
Syntax:
`<input type=hidden name=userlink
value="/cgi-bin/admin-user?name=%">'
3. vaddalias
3.1 Overview
This CGI program can be used to add an alias to a virtual domain.
3.2 Form Configuration
3.2.1 Required Form Fields
Field:
username
Description:
The virtual user name of the alias to create.
Syntax:
`<input type=text name=username>'
Field:
destination
Description:
The destination address or addresses of the alias, separated by
commas. If an address does not contain a host name (separated
from the user name with an `@'), it is treated as local to the
virtual domain and must already exist.
Syntax:
`<input type=text name=destination>'
3.2.2 Optional Form Fields
Field:
newpass1, newpass2
Description:
These two fields specify the new password of the user. They
must match for the password to be changed. The first eight
characters are relevant, and may be any combination of letters,
digits, or punctuation symbols. If these fields are not present
or are empty, a null passcode is used.
Syntax:
`<input type=password name=newpass1><input type=password
name=newpass1>'
4. vadduser
4.1 Overview
This CGI program can be used to add a user mailbox to a virtual
domain.
4.2 Form Configuration
4.2.1 Required Form Fields
Field:
username
Description:
The virtual user name of the alias to create.
Syntax:
`<input type=text name=username>'
Field:
newpass1, newpass2
Description:
These two fields specify the new password of the user. They
must match for the password to be changed. The first eight
characters are relevant, and may be any combination of letters,
digits, or punctuation symbols.
Syntax:
`<input type=password name=newpass1><input type=password
name=newpass1>'
4.2.2 Optional Form Fields
Field:
destination
Description:
The destination address or addresses to direct a copy of
incoming mail, separated by commas. If an address does not
contain a host name (separated from the user name with an `@'),
it is treated as local to the virtual domain and must already
exist. If this field is not present or blank, no forwarding
will be done.
Syntax:
`<input type=text name=destination>'
Field:
userdir
Description:
This field can be used to specify the user mail directory name
relative to the virtual domain's users directory. If this field
is not present, the directory name will be the same as the user
name.
Syntax:
`<input type=text name=userdir>'
5. vchattr
5.1 Overview
This CGI program can be used to change the attributes of an existing
user in a virtual domain.
5.2 Form Configuration
5.2.1 Required Form Fields
Field:
username
Description:
The virtual user name to modify.
Syntax:
`<input type=text name=username>'
Field:
attribute
Description:
The number of the attribute to modify. The possible values are:
`1'
The password. Use the `vpasswd' CGI to do this.
`2'
The forwarding destination. Use the `vchforwards' to do
this.
`3'
The hard quota.
`4'
The soft quota.
`5'
The message size limit.
`6'
The message count limit.
`7'
The account's expiry time.
`8'
Set to zero to disable delivery to the account's mailbox
(without deleting the account). Set to non-zero to enable
delivery.
`9'
The personal information string.
Syntax:
`<input type=hidden name=attribute value=2>'
Field:
newvalue
Description:
The new value for the given attribute. The format of this new
value is dependant on the type of the attribute.
Syntax:
`<input type=text name=newvalue>'
6. vchforwards
6.1 Overview
This CGI program can be used to change the forwarding destination of
an existing user.
6.2 Form Configuration
6.2.1 Required Form Fields
Field:
username
Description:
The virtual user name to modify.
Syntax:
`<input type=text name=username>'
Field:
destination
Description:
The destination address or addresses of the alias, separated by
commas. If an address does not contain a host name (separated
from the user name with an `@'), it is treated as local to the
virtual domain and must already exist.
Syntax:
`<input type=text name=destination>'
6.2.2 Optional Form Fields
Field:
enable
Description:
Set this field to `0' to cause mailbox delivery to this account
to be disabled after changing the alias. Set it to any number
except `0' to cause mailbox delivery to be enabled before
changing the alias. If it is not set, the mailbox is neither
enabled nor disabled.
Syntax:
`<select name=enable> <option value=0>Disable <option
value=1>Enable </select>'
7. vdeluser
7.1 Overview
This CGI program deletes a user from a virtual domain.
7.2 Form Configuration
7.2.1 Required Form Fields
Field:
username
Description:
The virtual user name of the user to delete.
Syntax:
`<input type=text name=username>'
8. vpasswd
8.1 Overview
This CGI program can be used to change the password of a user either
by the user themself or by the domain administrator.
8.2 Form Configuration
The password field used by this CGI may match either the password of
the virtual domain administrator or that of the user being modified.
8.2.1 Required Form Fields
Field:
username
Description:
This field specifies the name of the user that is to be
modified.
Syntax:
`<input type=text name=username>'
Field:
newpass1, newpass2
Description:
These two fields specify the new password of the user. They
must match for the password to be changed. The password may
contain any combination of letters, digits, or punctuation
symbols.
Syntax:
`<input type=password name=newpass1> <input type=password
name=newpass2>'
_________________________________________________________________
This document was generated on 14 September 2000 using
texi2html 1.56k.